Проблема с подключением по wifi

Поставил kubuntu 15.04 на чистый хард, все встало великолепно, далее при подключении к скрытой сети, добавил ее в манагере, все приконектился на ура. После связь оборвалась, и помогает только выключение компа и то не надолго. Подскажите в чем может быть проблема?

+2
BOSS_SAS - 24 Апрель, 2015 - 16:15

Надо название темы что ли поправить.. чтоб на смысл этой темы было похоже) а не на релиз 15.04.

Ну и конечно дай больше инфы

ifconfig
iwconfig
также предлагаю пошарится по этому форуму. вопросы по проблемам сети не раз описывались

0
akumaKRAS - 24 Апрель, 2015 - 16:25

А что дадут эти команды, если не подключается к сети

Это ответ dmesg

+1
jacobtey - 24 Апрель, 2015 - 16:48
Изображение пользователя jacobtey.

Ну и конечно дай больше инфы

ifconfig
iwconfig

Это ответ dmesg

0
akumaKRAS - 24 Апрель, 2015 - 17:31

0
akumaKRAS - 24 Апрель, 2015 - 17:32

у меня есть вывод команды dmesg, в текстовых файлах, но я незнаю как их воткнуть

0
kot040188 - 24 Апрель, 2015 - 17:34
Изображение пользователя kot040188.

А почему нельзя просто скопировать и вставить в сообщение?! Тем более, что всё равно очень мелко моём 21 дюйме, а если меньше…

0
akumaKRAS - 24 Апрель, 2015 - 17:34
Развернуть/свернуть скрытый текст.
[ 9.044700] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'
[ 9.046800] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
[ 17.922973] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 17.938850] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 17.940305] wlan0: authenticated
[ 17.942562] wlan0: associate with bc:ae:c5:e8:36:b6 (try 1/3)
[ 17.944859] wlan0: RX AssocResp from bc:ae:c5:e8:36:b6 (capab=0x401 status=0 aid=4)
[ 17.944901] wlan0: associated
[ 65.307742] ieee80211 phy0: wlan0: No probe response from AP bc:ae:c5:e8:36:b6 after 500ms, disconnecting.
[ 65.326426] cfg80211: Calling CRDA to update world regulatory domain
[ 65.328498] cfg80211: World regulatory domain updated:
[ 65.328501] cfg80211: DFS Master region: unset
[ 65.328502] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 65.328504] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328505] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328506] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328508] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328509] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 66.480165] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 66.501065] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 66.703699] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 66.907662] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 67.111675] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 67.287650] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 67.947615] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 68.107623] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 69.160220] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 69.180981] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 69.383573] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 69.587562] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 69.791552] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 69.967556] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 71.127506] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 71.287497] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 72.287977] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 72.308840] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 72.511438] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 72.715430] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 72.919420] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 73.095423] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 78.259229] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 78.419223] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2419.845127] usblp1: removed
[ 2430.702400] usblp 3-1.4:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x06BC pid 0x02ED
[ 3970.321138] show_signal_msg: 18 callbacks suppressed
[ 3970.321147] kactivitymanage[1494]: segfault at 7fa2500f0cd0 ip 00007fa2500a7031 sp 00007ffdae2882a8 error 4 in libQt5Sql.so.5.4.1[7fa250093000+3f000]
[ 3970.334837] QXcbEventReader[1531]: segfault at 7f96f0fe3099 ip 00007f96f0fe3099 sp 00007f96ee24fe20 error 14 in locale-archive[7f96f1072000+3fb000]
[ 4210.541875] traps: SelectionManage[1788] general protection ip:7fa5011e3e98 sp:7fa4cfffeae0 error:0 in libmergedlo.so[7fa4ff66c000+3a28000]
[ 4239.233509] traps: QXcbEventReader[2478] general protection ip:7f6f7fa9b1cb sp:7f6f6c4e6c30 error:0 in libc-2.21.so[7f6f7fa1c000+1c0000]
[ 5972.276027] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 5972.296443] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 5972.297886] wlan0: authenticated
[ 5972.298968] wlan0: associate with bc:ae:c5:e8:36:b6 (try 1/3)
[ 5972.301280] wlan0: RX AssocResp from bc:ae:c5:e8:36:b6 (capab=0x401 status=0 aid=13)
[ 5972.301335] wlan0: associated
[ 6179.402099] usb 1-2.4: new high-speed USB device number 4 using xhci_hcd
[ 6179.493628] usb 1-2.4: New USB device found, idVendor=8564, idProduct=1000
[ 6179.493632] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6179.493635] usb 1-2.4: Product: Mass Storage Device
[ 6179.493637] usb 1-2.4: Manufacturer: JetFlash
[ 6179.493639] usb 1-2.4: SerialNumber: 43JAZTG1BTTVW78M
[ 6179.494462] usb 1-2.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 6179.494470] usb 1-2.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 6179.495286] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[ 6179.495516] scsi host7: usb-storage 1-2.4:1.0
[ 6181.188163] scsi 7:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 4
[ 6181.188562] sd 7:0:0:0: Attached scsi generic sg8 type 0
[ 6181.190160] sd 7:0:0:0: [sdh] 61734912 512-byte logical blocks: (31.6 GB/29.4 GiB)
[ 6181.190910] sd 7:0:0:0: [sdh] Write Protect is off
[ 6181.190917] sd 7:0:0:0: [sdh] Mode Sense: 43 00 00 00
[ 6181.192703] sd 7:0:0:0: [sdh] No Caching mode page found
[ 6181.192707] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[ 6181.195439] sdh: sdh1
[ 6181.196944] sd 7:0:0:0: [sdh] Attached SCSI removable disk
[ 6249.121806] usb 1-2.4: USB disconnect, device number 4
[ 6256.280234] FAT-fs (sdh1): unable to read boot sector to mark fs as dirty
[ 6856.053833] ieee80211 phy0: wlan0: No probe response from AP bc:ae:c5:e8:36:b6 after 500ms, disconnecting.
[ 6856.072548] cfg80211: Calling CRDA to update world regulatory domain
[ 6856.075958] cfg80211: World regulatory domain updated:
[ 6856.075964] cfg80211: DFS Master region: unset
[ 6856.075966] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6856.075970] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075972] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075975] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075977] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075980] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6857.174485] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 6857.195218] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 6857.397828] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 6857.601821] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 6857.805822] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 6857.981829] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 6858.641827] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 6858.801825] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8119.176181] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8119.195916] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8119.197361] wlan0: authenticated
[ 8119.199393] wlan0: associate with bc:ae:c5:e8:36:b6 (try 1/3)
[ 8119.201961] wlan0: RX AssocResp from bc:ae:c5:e8:36:b6 (capab=0x401 status=0 aid=10)
[ 8119.202012] wlan0: associated
[ 8208.000610] ieee80211 phy0: wlan0: No probe response from AP bc:ae:c5:e8:36:b6 after 500ms, disconnecting.
[ 8208.176569] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8208.336555] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8208.337869] cfg80211: Calling CRDA to update world regulatory domain
[ 8208.341553] cfg80211: World regulatory domain updated:
[ 8208.341558] cfg80211: DFS Master region: unset
[ 8208.341560] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8208.341564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341567] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341570] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341572] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341574] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.596576] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8208.756584] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8208.916572] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8209.076552] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8210.129105] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8210.296528] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8210.456564] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8210.469741] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8210.672552] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8210.876530] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8211.080543] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8211.256552] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8211.416549] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8212.076514] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8212.236508] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8212.396504] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8212.556504] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8213.557178] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8213.724481] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8213.884481] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8213.897775] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8214.100465] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8214.304485] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8214.508458] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8214.684453] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8214.844463] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8216.004446] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8216.164437] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8216.324429] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8216.484438] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8217.656434] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8217.816430] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8222.648344] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8222.808340] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8222.968300] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8223.128305] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8224.296258] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8224.964294] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8225.124275] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8226.124941] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8226.145636] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8226.348236] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8226.552239] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8226.756242] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8226.932232] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8232.092147] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8232.252147] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8239.260492] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8239.281428] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8239.484015] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8239.688033] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8239.892010] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8240.068024] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
выключена
0
akumaKRAS - 24 Апрель, 2015 - 17:35
Развернуть/свернуть скрытый текст.
9.044700] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'
[ 9.046800] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
[ 17.922973] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 17.938850] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 17.940305] wlan0: authenticated
[ 17.942562] wlan0: associate with bc:ae:c5:e8:36:b6 (try 1/3)
[ 17.944859] wlan0: RX AssocResp from bc:ae:c5:e8:36:b6 (capab=0x401 status=0 aid=4)
[ 17.944901] wlan0: associated
[ 65.307742] ieee80211 phy0: wlan0: No probe response from AP bc:ae:c5:e8:36:b6 after 500ms, disconnecting.
[ 65.326426] cfg80211: Calling CRDA to update world regulatory domain
[ 65.328498] cfg80211: World regulatory domain updated:
[ 65.328501] cfg80211: DFS Master region: unset
[ 65.328502] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 65.328504] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328505] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328506] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328508] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 65.328509] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 66.480165] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 66.501065] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 66.703699] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 66.907662] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 67.111675] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 67.287650] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 67.947615] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 68.107623] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 69.160220] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 69.180981] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 69.383573] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 69.587562] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 69.791552] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 69.967556] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 71.127506] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 71.287497] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 72.287977] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 72.308840] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 72.511438] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 72.715430] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 72.919420] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 73.095423] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 78.259229] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 78.419223] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 2419.845127] usblp1: removed
[ 2430.702400] usblp 3-1.4:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x06BC pid 0x02ED
[ 3970.321138] show_signal_msg: 18 callbacks suppressed
[ 3970.321147] kactivitymanage[1494]: segfault at 7fa2500f0cd0 ip 00007fa2500a7031 sp 00007ffdae2882a8 error 4 in libQt5Sql.so.5.4.1[7fa250093000+3f000]
[ 3970.334837] QXcbEventReader[1531]: segfault at 7f96f0fe3099 ip 00007f96f0fe3099 sp 00007f96ee24fe20 error 14 in locale-archive[7f96f1072000+3fb000]
[ 4210.541875] traps: SelectionManage[1788] general protection ip:7fa5011e3e98 sp:7fa4cfffeae0 error:0 in libmergedlo.so[7fa4ff66c000+3a28000]
[ 4239.233509] traps: QXcbEventReader[2478] general protection ip:7f6f7fa9b1cb sp:7f6f6c4e6c30 error:0 in libc-2.21.so[7f6f7fa1c000+1c0000]
[ 5972.276027] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 5972.296443] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 5972.297886] wlan0: authenticated
[ 5972.298968] wlan0: associate with bc:ae:c5:e8:36:b6 (try 1/3)
[ 5972.301280] wlan0: RX AssocResp from bc:ae:c5:e8:36:b6 (capab=0x401 status=0 aid=13)
[ 5972.301335] wlan0: associated
[ 6179.402099] usb 1-2.4: new high-speed USB device number 4 using xhci_hcd
[ 6179.493628] usb 1-2.4: New USB device found, idVendor=8564, idProduct=1000
[ 6179.493632] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6179.493635] usb 1-2.4: Product: Mass Storage Device
[ 6179.493637] usb 1-2.4: Manufacturer: JetFlash
[ 6179.493639] usb 1-2.4: SerialNumber: 43JAZTG1BTTVW78M
[ 6179.494462] usb 1-2.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 6179.494470] usb 1-2.4: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 6179.495286] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[ 6179.495516] scsi host7: usb-storage 1-2.4:1.0
[ 6181.188163] scsi 7:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 4
[ 6181.188562] sd 7:0:0:0: Attached scsi generic sg8 type 0
[ 6181.190160] sd 7:0:0:0: [sdh] 61734912 512-byte logical blocks: (31.6 GB/29.4 GiB)
[ 6181.190910] sd 7:0:0:0: [sdh] Write Protect is off
[ 6181.190917] sd 7:0:0:0: [sdh] Mode Sense: 43 00 00 00
[ 6181.192703] sd 7:0:0:0: [sdh] No Caching mode page found
[ 6181.192707] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[ 6181.195439] sdh: sdh1
[ 6181.196944] sd 7:0:0:0: [sdh] Attached SCSI removable disk
[ 6249.121806] usb 1-2.4: USB disconnect, device number 4
[ 6256.280234] FAT-fs (sdh1): unable to read boot sector to mark fs as dirty
[ 6856.053833] ieee80211 phy0: wlan0: No probe response from AP bc:ae:c5:e8:36:b6 after 500ms, disconnecting.
[ 6856.072548] cfg80211: Calling CRDA to update world regulatory domain
[ 6856.075958] cfg80211: World regulatory domain updated:
[ 6856.075964] cfg80211: DFS Master region: unset
[ 6856.075966] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6856.075970] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075972] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075975] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075977] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6856.075980] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6857.174485] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 6857.195218] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 6857.397828] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 6857.601821] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 6857.805822] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 6857.981829] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 6858.641827] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 6858.801825] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8119.176181] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8119.195916] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8119.197361] wlan0: authenticated
[ 8119.199393] wlan0: associate with bc:ae:c5:e8:36:b6 (try 1/3)
[ 8119.201961] wlan0: RX AssocResp from bc:ae:c5:e8:36:b6 (capab=0x401 status=0 aid=10)
[ 8119.202012] wlan0: associated
[ 8208.000610] ieee80211 phy0: wlan0: No probe response from AP bc:ae:c5:e8:36:b6 after 500ms, disconnecting.
[ 8208.176569] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8208.336555] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8208.337869] cfg80211: Calling CRDA to update world regulatory domain
[ 8208.341553] cfg80211: World regulatory domain updated:
[ 8208.341558] cfg80211: DFS Master region: unset
[ 8208.341560] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8208.341564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341567] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341570] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341572] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.341574] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8208.596576] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8208.756584] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8208.916572] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8209.076552] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8210.129105] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8210.296528] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8210.456564] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8210.469741] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8210.672552] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8210.876530] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8211.080543] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8211.256552] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8211.416549] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8212.076514] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8212.236508] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8212.396504] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8212.556504] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8213.557178] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8213.724481] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8213.884481] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8213.897775] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8214.100465] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8214.304485] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8214.508458] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8214.684453] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8214.844463] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8216.004446] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8216.164437] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8216.324429] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8216.484438] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8217.656434] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8217.816430] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8222.648344] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8222.808340] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8222.968300] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8223.128305] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 8224.296258] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8224.964294] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8225.124275] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8226.124941] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8226.145636] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8226.348236] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8226.552239] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8226.756242] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8226.932232] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8232.092147] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8232.252147] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8239.260492] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 8239.281428] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 8239.484015] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 2/3)
[ 8239.688033] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 3/3)
[ 8239.892010] wlan0: authentication with bc:ae:c5:e8:36:b6 timed out
[ 8240.068024] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8248.847869] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 8249.007862] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 9295.133170] wlan0: authenticate with bc:ae:c5:e8:36:b6
[ 9295.153712] wlan0: send auth to bc:ae:c5:e8:36:b6 (try 1/3)
[ 9295.156518] wlan0: authenticated
[ 9295.160446] wlan0: associate with bc:ae:c5:e8:36:b6 (try 1/3)
[ 9295.162921] wlan0: RX AssocResp from bc:ae:c5:e8:36:b6 (capab=0x401 status=0 aid=6)
[ 9295.162985] wlan0: associated
включена
0
MacLeod - 24 Апрель, 2015 - 17:44
Изображение пользователя MacLeod.

Для начала, покажите вывод
netstat -nr

А потом попробуйте в настройках сетевого подключения снять галочку с "Автоматическое получение маршрутов" или вроде того, не помню, как пункт называется.

0
akumaKRAS - 24 Апрель, 2015 - 17:53

Таблица маршутизации ядра протокола IP
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
по поводу пункта нету ни чего такого

+2
AlexBKost - 24 Апрель, 2015 - 17:57

Ну, KRAS'ava, тебя же люди попросили убрать из названия темы Kubuntu 15.04 - она тут ни при чем.

В настройках своего соединения отметь квадратик Все пользователи могут подключатся к этой сети птичкой, или что там у тебя. И прячься, пока dyug не появился, а то он накостыляет.

0
akumaKRAS - 24 Апрель, 2015 - 20:30

Алекс попробую твой совет, по факту стояла 14.04 проблемы такой не было

+1
AlexBKost - 24 Апрель, 2015 - 21:03

Это не просто мой совет, а dyug'овская разработка, которой и я воспользовался в свое время, потому решил поддержать эстафету и обеспечить ему приятный уикенд. И найти её по сайту составило бы меньше труда, чем расстилать такие простыни выхлопов - запомни про наличие специальной кнопки [CL] для них.
А в 14.04 совсем другой нэтворк-менагер был, поэтому не удивляйся. Молодец, что название темы поправил.

0
akumaKRAS - 25 Апрель, 2015 - 08:11

Alex не помогло, при первом включении компа, все включается инет есть, потом через какое-то время обрывается и заново включиться не может.

+1
akumaKRAS - 25 Апрель, 2015 - 10:34

посоветовали следующее
1. Попробуйте сделать переустановку менеджера сети:

sudo apt-get install --reinstall bcmwl-kernel-source

2. Если не поможет первый вариант, выполните этот скрипт:

sudo sh -c 'echo "options iwlwifi 11n_disable=1" >> /etc/modprobe.d/iwlwifi.conf'

пока полет нормальный, хочу посмотреть как будет работать с торентами и после ребута. После отпишусь о результатах

0
akumaKRAS - 25 Апрель, 2015 - 16:34

Вообщем упала плазма. При повторной установке и попытки решить данную проблему падает плазма

0
dyug - 26 Апрель, 2015 - 11:15

ничего подобного - это не моя разработка, это ремонт бага, описанный на багс.ланчпад
Более того, эта бага была не только с wi-fi, но и с проводным интерфейсом тоже.
То есть чистый баг самого нетворк-манагера.

0
dyug - 26 Апрель, 2015 - 11:11

а? Шо? Хто мне тут звал? :-)

Нет, не знаю. Пока, в чем проблема. У меня подключается без проблем... Вроде...
Подключается без проблем. Во всяком случае сейчас проверил.
Правда, мой нетбук и не имеет части проблем, связанных с некоторыми wi-if чипами.
А так, смотря на выводы - есть у мну мнение, что проблема с ядерным модулем.

Обосновать не могу пока, но задницей чую. А она у меня наиболее чувствительная в этом вопросе.

0
dyug - 26 Апрель, 2015 - 11:16

вопрос автору - обновлял ли он пакеты после установки?
Ибо было обновление wpasuppliant, но я не смотрел, что именно лечилось апдейтом.

0
leisampei - 26 Апрель, 2015 - 11:38
Изображение пользователя leisampei.

не смотрел, что именно лечилось апдейтом.
Наверно это

0
akumaKRAS - 26 Апрель, 2015 - 20:16

Да как только поставил сразу все обновил, и да скорее всего проблема возникла после обнавления. Долгими копаниями выяснил что падает и не запускается некий ksmserver.

0
AlexBKost - 26 Апрель, 2015 - 22:07

Давайте пойдем таким путем - если бы в вашей проблеме было виновно обновление wpasupplicant, а оно таки проводилось на следующий день после релиза, то почему не повлияло на работу у всех остальных счастливых обладателей новой системы, а только у вас?
Я уже не говорю об отсутствии какого-либо ksmserver в новой системе.

Но отчаиваться не надо - я недавно на 15.04 поймал аж дна косяка на старом-добром TVtime, которых уже не должно было бы быть - один проявлялся в далеких 2008-10 г.г., а второй непонятно как всплыл, ибо на 14.10 его уже не было. Но успешно от них избавился - когда припрет много чего можно сделать.

Отправить комментарий

CAPTCHA на основе изображений
Введите цифры